Area to Circle

Area

Drawn to scale

50 cm²

Show on drawing
Scale drawing of the circle with the entered area d r C

Circle

Working

    What Is the Area of a Circle?

    The area of a circle is the amount of flat space inside the circle's boundary, measured in square units such as square centimeters (cm²), square meters (m²) and square inches (in²). A circle with a radius of 5 cm (1.97 in) has an area of 78.54 cm² (12.17 in²), from the formula A = πr²: π × 5² = 78.54.

    A circle is the set of all points in a plane at the same distance, the radius (r), from 1 center point. Euclidean geometry treats the circle as a 2-dimensional (2D) shape, so a circle has an area and a perimeter but no volume. Euclid's Elements (Book XII, Proposition 2) showed that the areas of 2 circles have the same ratio as the squares of their diameters.

    "Area to circle" is the reverse operation: converting a known area into the radius, diameter and circumference of a circle with that area. The calculator above performs this area to circle conversion with r = √(A ÷ π).

    Real-World Uses of Circle Area

    There are 5 common uses of circle area calculations, including pizza sizing, irrigation and data visualization:

    • Pizza sizes: a 16-inch pizza (201.06 in², 1,297 cm²) has 1.78 times the area of a 12-inch pizza (113.10 in², 730 cm²).
    • Sprinkler coverage: a sprinkler with a 6 m (19.7 ft) reach waters 113.1 m² (1,217 ft²).
    • Pipe flow: a pipe with a 50 mm (1.97 in) inner diameter has a 1,963.5 mm² (3.04 in²) cross-section.
    • Bubble charts: a bubble chart sizes each circle by area, so a value of 100 gets a radius of √(100 ÷ π) = 5.64 units.
    • Proportional symbol maps: a cartogram converts each region's value into a circle with a matching area.
    A circle with a radius of 5 units drawn over a grid of unit squares r = 5
    Each square is 1 square unit. 60 whole squares plus 28 partial squares fill the circle, which covers exactly π × 5² = 78.54 square units.

    Area of a Circle Formula

    The area of a circle formula is A = πr², where A is the area, π (pi) is a constant equal to 3.14159 and r is the radius. There are 3 versions of the circle area formula, 1 for each starting measurement: radius, diameter and circumference.

    Circle area formulas with an example for a circle with a 4 cm radius
    Known valueFormulaExampleArea
    Radius (r)A = πr²r = 4 cm50.27 cm² (7.79 in²)
    Diameter (d)A = πd² ÷ 4d = 8 cm50.27 cm² (7.79 in²)
    Circumference (C)A = C² ÷ 4πC = 25.13 cm50.27 cm² (7.79 in²)

    Area Using Radius (A = πr²)

    To find the area of a circle using the radius, square the radius and multiply the result by π. A radius of 4 cm (1.57 in) gives A = π × 4² = π × 16 = 50.27 cm² (7.79 in²).

    A = π × r × r

    The formula comes from Archimedes (c. 287–212 BC). In Measurement of a Circle, Archimedes proved that the area of a circle equals the area of a right triangle with a base equal to the circumference (2πr) and a height equal to the radius (r): ½ × 2πr × r = πr².

    A second proof needs no calculus. Cut the circle into 16 equal sectors and lay the sectors tip-to-tail. The sectors form a shape close to a rectangle with a width of πr (half the circumference) and a height of r, and πr × r = πr². More sectors give a closer rectangle.

    A circle cut into 16 sectors, rearranged into a near-rectangle with width πr and height r 16 sectors width ≈ πr (half the circumference) r
    Area = width × height = πr × r = πr².

    Area Using Diameter (A = πd²/4)

    To find the area of a circle using the diameter, square the diameter, multiply by π and divide by 4. A diameter of 8 cm (3.15 in) gives A = π × 8² ÷ 4 = π × 64 ÷ 4 = 50.27 cm² (7.79 in²).

    A = π × d² ÷ 4

    The diameter version works since the radius is half the diameter (r = d ÷ 2) and (d ÷ 2)² = d² ÷ 4. A shortcut is A ≈ 0.7854 × d²: a circle fills 78.54% of the square drawn around the circle, with sides equal to the diameter.

    A circle inside a square with sides equal to the diameter; the circle fills 78.54% of the square d 78.54% of d² square = d × d
    The hatched corners are the 21.46% of the square outside the circle.

    Area Using Circumference (A = C²/4π)

    To find the area of a circle using the circumference, square the circumference and divide by 4π (12.566). A circumference of 25.1327 cm (9.89 in) gives A = 25.1327² ÷ 12.566 = 631.65 ÷ 12.566 = 50.27 cm² (7.79 in²).

    A = C² ÷ (4 × π)

    The formula comes from r = C ÷ 2π: substituting into πr² gives π × (C ÷ 2π)² = C² ÷ 4π. Use the circumference version with a tape measure wrapped around a tree trunk, pipe or column. A tree trunk with a 1.5 m (59 in) girth has a cross-section area of 0.179 m² (277.5 in²).

    The circumference of a circle wrapped around the edge and laid out as a straight line A C = 2πr distance around circumference laid flat
    A tape measure around the edge gives C; the area follows from C² ÷ 4π.

    What Is π (Pi) and Which Value Should You Use?

    Pi (π) is the ratio of a circle's circumference to its diameter, equal to 3.14159265358979… Every circle has the same ratio: the circumference is 3.14159 times the diameter. Johann Heinrich Lambert proved in 1761 that π is irrational, so the decimal digits of π never end and never repeat. Archimedes bounded π between 3 10/71 (3.1408) and 3 1/7 (3.1429) with 96-sided polygons.

    The circumference of a circle with diameter d equals 3 diameters plus 0.14159 of a diameter d = 1 d d d +0.14159 circumference = π × d = 3.14159 × d
    Unrolled, the edge of any circle measures 3 full diameters plus 0.14159 of a diameter.

    There are 5 common values of π, including 3.14, 22/7 and 3.14159. The right value depends on the precision the task needs:

    Common approximations of π and their error
    ValueDecimalError vs. πUse for
    33−4.51%Rough mental estimates
    3.143.14−0.051%School homework, quick estimates
    22/73.142857+0.040%Fraction-based hand calculation
    3.141593.14159−0.00008%Engineering, construction drawings
    15 decimals3.141592653589793≈ 0%Calculators, software, NASA's Jet Propulsion Laboratory (JPL) navigation

    This calculator uses π to 15 decimal places (3.141592653589793), the value built into JavaScript. Use 3.14 for homework, unless the question names a different value. GeoGebra, Mathway and Khan Academy exercises use the same A = πr² formula, so the results match to the chosen precision.

    How to Calculate the Area of a Circle (Step by Step)

    To calculate the area of a circle, follow 4 steps:

    1. Measure the radius, diameter or circumference of the circle.
    2. Convert the measurement to a radius with r = d ÷ 2 or r = C ÷ 2π.
    3. Square the radius (r × r).
    4. Multiply the squared radius by π (3.14159) and write the answer in square units.

    There are 4 common mistakes in circle area calculation, including using the diameter as the radius:

    • Diameter as radius: putting the diameter into πr² gives an area 4 times too large.
    • Squared π: computing (πr)² in place of π × r² gives an area 3.14 times too large.
    • Missing square units: "50.27" is incomplete; "50.27 cm²" is correct.
    • Early rounding: rounding r = 3.98942 to 4 before squaring adds a 0.53% error.

    Example 1: Area from a Radius

    Find the area of a circle with a radius of 5 cm (1.97 in).

    1. r = 5 cm
    2. r² = 5 × 5 = 25 cm²
    3. A = π × 25 = 78.54 cm²

    The area is 78.54 cm² (12.17 in²).

    r = 5 cm 78.54 cm²

    Example 2: Area from a Diameter

    Find the area of a circle with a diameter of 10 in (25.4 cm).

    1. r = 10 ÷ 2 = 5 in
    2. r² = 5 × 5 = 25 in²
    3. A = π × 25 = 78.54 in²

    The area is 78.54 in² (506.71 cm²).

    The digits match Example 1: a 10-unit diameter is a 5-unit radius.

    d = 10 in 78.54 in²

    Example 3: Area from a Circumference

    Find the area of a circular garden bed with a circumference of 20 m (65.6 ft).

    1. r = 20 ÷ (2 × π) = 3.183 m
    2. r² = 3.183 × 3.183 = 10.132 m²
    3. A = π × 10.132 = 31.83 m²

    The area is 31.83 m² (342.62 ft²).

    Check with A = C² ÷ 4π: 400 ÷ 12.566 = 31.83 m².

    C = 20 m 31.83 m²

    How to Use the Area of a Circle Calculator

    To use the area of a circle calculator, enter an area and read the radius, diameter and circumference of the matching circle. The calculator works in 5 steps:

    1. Type the area into the Area field, or drag the slider from 0.01 to 100,000,000.
    2. Pick 1 of 10 area units, including mm², cm², m², hectares (ha), acres (ac) and square miles (mi²).
    3. Choose the length unit for the results in the "Results in" menu.
    4. Read the radius, diameter, circumference and equal-area square side, with every formula step in the Working panel.
    5. Drag the red handle on the circle to resize the circle and change the area.

    The calculator has 4 extra controls, including presets and shareable links:

    • Significant digits: 3, 4, 6 or 8 digits for every result.
    • Presets: 1 m², an A4 sheet (624 cm²), a tennis court (261 m²), 1 acre and 1 km².
    • Copy buttons: click a result to copy it, or press "Copy all" for every value.
    • Copy link: a URL that reopens the calculator with the same area and units.

    To find the area from a radius, diameter or circumference, use the area of circle given radius, area of circle if diameter is given and area of circle given circumference calculators.

    Open the calculator

    The calculator flow: an area of 50 cm² becomes a circle with radius 3.99 cm, diameter 7.98 cm and circumference 25.07 cm 50 cm² 1. Area r = 3.99 cm d = 7.98 cm C = 25.07 cm 2. Circle drawn to scale + results
    An area of 50 cm² converts to a circle with a 3.99 cm radius.

    Area of a Circle Using Different Units

    The area of a circle is always in square units: the square of the unit used for the radius. A radius in centimeters (cm) gives an area in square centimeters (cm²), and a radius in feet (ft) gives an area in square feet (ft²).

    Common Units (mm², cm², m², in², ft², yd²)

    There are 6 common units for circle area, 3 metric and 3 imperial, including cm², m² and ft²:

    Common square units for the area of a circle
    UnitSymbolEqualsExample circle
    Square millimetermm²0.01 cm²A 50 mm (1.97 in) pipe bore: 1,963.5 mm²
    Square centimetercm²100 mm²A US quarter (24.26 mm): 4.62 cm²
    Square meterm²10,000 cm²A 1.2 m (3.94 ft) round table: 1.13 m²
    Square inchin²6.4516 cm²A 12-inch (30.5 cm) pizza: 113.10 in²
    Square footft²144 in² (0.0929 m²)A 10 ft (3.05 m) round patio: 78.54 ft²
    Square yardyd²9 ft² (0.8361 m²)A 20 yd (18.3 m) circular lawn: 314.16 yd²
    1 square millimeter, 1 square centimeter and 1 square inch drawn to the same scale 1 mm² 1 cm² 1 in² 1 square foot, 1 square yard and 1 square meter drawn to the same scale 1 ft² 1 yd² 1 m²
    Left: 1 in² holds 6.45 cm². Right: 1 m² holds 10.76 ft² and 1.196 yd². Each panel is to scale.

    Converting Between Square Units

    To convert between square units, multiply by the square of the length conversion factor. 1 m equals 100 cm, so 1 m² equals 100² = 10,000 cm², not 100 cm².

    Square unit conversion factors
    FromEqualsLength factor
    1 cm²100 mm²1 cm = 10 mm
    1 m²10,000 cm² = 1,000,000 mm²1 m = 100 cm
    1 km²1,000,000 m² = 100 ha1 km = 1,000 m
    1 in²6.4516 cm²1 in = 2.54 cm
    1 ft²144 in² = 929.03 cm²1 ft = 12 in
    1 yd²9 ft² = 0.836127 m²1 yd = 3 ft
    1 m²10.7639 ft² = 1.19599 yd²1 m = 3.28084 ft
    1 acre (ac)43,560 ft² = 4,046.86 m²—
    1 hectare (ha)10,000 m² = 2.471 ac—

    A circle with an area of 78.54 cm² equals 7,854 mm², 0.007854 m² and 12.17 in². To convert the radius before calculating, convert the length first and then square it: a 5 cm radius is 1.9685 in, and π × 1.9685² = 12.17 in².

    Circle Area Reference Table (Common Radii and Diameters)

    The circle area reference table lists the diameter, circumference and area of circles with radii from 0.5 to 100 units. The values work for any unit: a radius of 3 cm gives 28.27 cm², and a radius of 3 ft gives 28.27 ft².

    Circle area by radius (any unit)
    Radius (r)Diameter (d)Circumference (C)Area (A)
    0.51.03.140.79
    126.283.14
    1.53.09.427.07
    2412.5712.57
    2.55.015.7119.63
    3618.8528.27
    4825.1350.27
    51031.4278.54
    61237.70113.10
    71443.98153.94
    81650.27201.06
    91856.55254.47
    102062.83314.16
    122475.40452.39
    153094.25706.86
    2040125.661,256.64
    2550157.081,963.50
    50100314.167,853.98
    100200628.3231,415.93

    Area grows with the square of the radius

    Bar chart of circle area for radii 1 to 10 Area rises from 3.14 at r = 1 to 78.54 at r = 5 and 314.16 at r = 10. 0 100 200 300 3.14 1 r = 1: area = 3.14 square units 2 r = 2: area = 12.57 square units 3 r = 3: area = 28.27 square units 4 r = 4: area = 50.27 square units 78.54 5 r = 5: area = 78.54 square units 6 r = 6: area = 113.10 square units 7 r = 7: area = 153.94 square units 8 r = 8: area = 201.06 square units 9 r = 9: area = 254.47 square units 314.16 10 r = 10: area = 314.16 square units Radius (units) Area (square units)
    A radius of 10 gives 100 times the area of a radius of 1, not 10 times. Hover a bar for its value.

    Common Diameters in Inches

    Circle area for common diameters in inches
    Diameter (in)Diameter (cm)Area (in²)Area (cm²)
    6 in15.2 cm28.27 in²182.4 cm²
    8 in20.3 cm50.27 in²324.3 cm²
    10 in25.4 cm78.54 in²506.7 cm²
    12 in30.5 cm113.10 in²729.7 cm²
    14 in35.6 cm153.94 in²993.1 cm²
    16 in40.6 cm201.06 in²1,297.2 cm²
    18 in45.7 cm254.47 in²1,641.7 cm²
    24 in61.0 cm452.39 in²2,918.6 cm²
    36 in91.4 cm1,017.88 in²6,566.9 cm²

    Common Diameters in Millimeters

    Circle area for common diameters in millimeters
    Diameter (mm)Diameter (in)Area (mm²)Area (cm²)Area (in²)
    10 mm0.39 in78.5 mm²0.79 cm²0.12 in²
    20 mm0.79 in314.2 mm²3.14 cm²0.49 in²
    25 mm0.98 in490.9 mm²4.91 cm²0.76 in²
    50 mm1.97 in1,963.5 mm²19.63 cm²3.04 in²
    100 mm3.94 in7,854.0 mm²78.54 cm²12.17 in²
    150 mm5.91 in17,671.5 mm²176.71 cm²27.39 in²
    200 mm7.87 in31,415.9 mm²314.16 cm²48.69 in²
    300 mm11.81 in70,685.8 mm²706.86 cm²109.56 in²
    500 mm19.69 in196,349.5 mm²1,963.50 cm²304.34 in²
    1,000 mm39.37 in785,398.2 mm²7,853.98 cm²1,217.37 in²

    Area vs. Radius, Diameter, and Circumference: What's the Difference?

    The difference is that radius, diameter and circumference are lengths in linear units (cm, in), and area is a surface in square units (cm², in²). All 4 measurements come from the radius, so 1 known value gives the other 3.

    Radius, diameter, circumference and area compared for a circle with a 5 cm radius
    MeasurementUnit typeFrom rr = 5 cm
    Radius (r)Linearr5 cm (1.97 in)
    Diameter (d)Linear2r10 cm (3.94 in)
    Circumference (C)Linear2πr31.42 cm (12.37 in)
    Area (A)Squareπr²78.54 cm² (12.17 in²)
    Parts of a circle: center, radius, diameter, circumference and area center radius r diameter d area A circumference C
    Radius, diameter and circumference are lines; area is the shaded surface.

    Radius and Diameter

    The radius (r) is the distance from the center of a circle to any point on the edge. The diameter (d) is the longest chord, running edge to edge through the center, and equals 2 radii: d = 2r. A unit circle has a radius of 1, a diameter of 2 and an area of π (3.14159).

    Circumference

    The circumference (C) is the perimeter of a circle: C = 2πr = πd. A circle with a 5 cm (1.97 in) radius has a 31.42 cm (12.37 in) circumference. A part of the circumference is an arc, and a 90° arc of the same circle measures 7.85 cm.

    Area

    The area (A) is the 2D space inside the circumference: A = πr². Area scales with the square of the radius: doubling r multiplies A by 4, and tripling r multiplies A by 9. Parts of a circle have their own area formulas, including the sector (θ ÷ 360° × πr²), the segment, the semicircle (πr² ÷ 2) and the annulus, or ring (π(R² − r²)).

    Area vs. Circumference

    Area and circumference differ in 3 ways: unit type, growth rate and formula.

    • Unit type: circumference is a length (cm); area is a surface (cm²).
    • Growth rate: circumference grows in step with r (2× r gives 2× C); area grows with r² (2× r gives 4× A).
    • Formula: C = 2πr and A = πr². The 2 formulas connect through A = C × r ÷ 2.

    The 2 values are numerically equal at r = 2, where both equal 4π (12.566). The circumference number is larger below r = 2, and the area number is larger above r = 2.

    Area and circumference of a circle for radii 0 to 4 The area curve πr² crosses the circumference line 2πr at r = 2, where both equal 12.57. 0 10 20 30 40 50 01234 r = 2: both 12.57 Area 50.27 Circumference 25.13 r = 1: area = 3.14, circumference = 6.28 r = 2: area = 12.57, circumference = 12.57 r = 3: area = 28.27, circumference = 18.85 r = 4: area = 50.27, circumference = 25.13 Radius (units)
    Values share 1 numeric axis: area in square units, circumference in linear units.
    Area and circumference values for radii 1 to 4
    rAreaCircumference
    13.146.28
    212.5712.57
    328.2718.85
    450.2725.13

    More Circle Area Calculators

    There are 11 more circle area calculators on Area to Circle, including area to diameter, area from radius, sector area and ring area tools. Each calculator draws the result to scale and shows every formula step.

    Frequently Asked Questions (FAQs)

    How do you find the radius of a circle from its area?

    You find the radius of a circle from its area by dividing the area by π and taking the square root: r = √(A ÷ π). An area of 50 cm² (7.75 in²) gives r = √(50 ÷ 3.14159) = √15.915 = 3.989 cm (1.571 in).

    How do you find the diameter of a circle from its area?

    You find the diameter of a circle from its area with d = 2√(A ÷ π), the same as d = √(4A ÷ π). An area of 50 cm² (7.75 in²) gives d = 2 × 3.989 = 7.979 cm (3.141 in).

    What is the area of a circle with a radius of 1?

    The area of a circle with a radius of 1 is π, or 3.14159 square units. A 1 cm radius gives 3.14159 cm² (0.487 in²), and a 1 m radius gives 3.14159 m² (33.82 ft²). A circle with a radius of 1 is the unit circle.

    What happens to the area when the radius doubles?

    The area of a circle becomes 4 times larger when the radius doubles, since area depends on r² and 2² = 4. A 3 cm radius gives 28.27 cm², and a 6 cm radius gives 113.10 cm². Tripling the radius multiplies the area by 9.

    What is the difference between π and 3.14?

    The difference between π and 3.14 is that π is an irrational number (3.14159265358979…) and 3.14 is π rounded to 2 decimal places. 3.14 is 0.05% smaller than π. For a 10 cm radius, π gives 314.16 cm² and 3.14 gives 314.00 cm², a difference of 0.16 cm².

    Why is the area of a circle πr²?

    The area of a circle is πr² since a circle cut into thin sectors rearranges into a near-rectangle with a width of πr and a height of r. The width is half the circumference (2πr ÷ 2), the height is the radius, and πr × r = πr². Archimedes proved the same result around 250 BC with a right triangle of base 2πr and height r.

    Is the area of a circle the same as its surface area?

    Yes, the area of a flat circle and the surface area of a flat circle are the same value, πr². The term "surface area" usually describes 3D solids. A sphere with radius r has a surface area of 4πr², 4 times the area of a circle with the same radius.

    How do you find the area of half or a quarter of a circle?

    You find the area of half a circle with πr² ÷ 2 and the area of a quarter circle with πr² ÷ 4. A semicircle with a 10 cm radius has an area of 157.08 cm² (24.35 in²), and a quarter circle with the same radius has an area of 78.54 cm² (12.17 in²).

    Can the area and circumference of a circle be equal?

    Yes, the area and circumference of a circle are numerically equal when the radius is 2 units. The equation πr² = 2πr gives r = 2, and both values equal 4π (12.566). The units differ: a 2 cm radius gives a 12.566 cm² area and a 12.566 cm circumference.

    Can the area and radius of a circle be equal?

    Yes, the area and radius of a circle are numerically equal when the radius is 1/π, or 0.3183 units. The equation πr² = r gives r = 1 ÷ π = 0.3183. A 0.3183 cm radius gives an area of 0.3183 cm².