Area circle with hole

Inputs

Drawn to scale

Results

Working

    How area circle with hole calculator works?

    The area circle with hole calculator finds the area of a ring (annulus) from the outer radius and the hole radius in 4 steps:

    1. Reads the outer radius (R) and the hole radius (r) in the same length unit.
    2. Checks that the hole radius is smaller than the outer radius.
    3. Subtracts the hole area from the outer circle area: A = π(R² − r²).
    4. Draws the ring with 2 draggable radii and a gold bracket for the ring width (R − r).

    The results show the ring area, ring width, outer circle area and hole area, and the share of the full circle the ring keeps.

    Area circle with hole formula

    The area circle with hole formula is A = π(R² − r²), where R is the outer radius and r is the hole radius.

    Symbols in the formula
    SymbolMeaningUnit
    ARing (annulus) areacm², m², in², ft²
    ROuter radiuscm, m, in, ft
    rHole radius (inner radius)cm, m, in, ft
    wRing width = R − rcm, m, in, ft

    A ring is a circle with a smaller circle removed from the center. The outer circle has an area of πR², the hole has an area of πr², and the difference is π(R² − r²).

    With diameters, the formula is A = π(D² − d²) ÷ 4. With the width w and the hole radius r, the formula is A = πw(2r + w).

    A = π(R² − r²) ring area 3.14159 outer radius² hole radius²
    Each colored symbol matches its line or shape in the scale drawing above.

    Worked example: R = 10 cm, r = 6 cm

    1. R² − r² = 100 − 36 = 64 cm²
    2. A = 3.14159 × 64 = 201.062 cm²

    A ring with a 10 cm outer radius and a 6 cm hole radius has an area of 201.06 cm² (31.16 in²).

    Related formulas

    Ring area

    A = π × (R² − r²)

    The big circle minus the hole.

    Ring width

    w = R − r

    How thick the ring is.

    From diameters

    A = π(D² − d²) ÷ 4

    Use this when you know diameters instead.

    Area circle with hole conversion chart

    The area circle with hole conversion chart lists the ring area for a 10 cm (3.94 in) outer radius with hole radii from 0 cm to 9 cm. The ring keeps half of the full circle when the hole radius is 7.07 cm (R ÷ √2).

    Hole radius (cm) to ring area, outer radius 10 cm
    Hole radius (cm)Ring width (cm)Ring area (cm²)Ring area (in²)Share of circle (%)
    0.0010.00314.1648.69100.0
    1.009.00311.0248.2199.0
    2.008.00301.5946.7596.0
    3.007.00285.8844.3191.0
    4.006.00263.8940.9084.0
    5.005.00235.6236.5275.0
    6.004.00201.0631.1664.0
    7.003.00160.2224.8351.0
    7.072.93157.1324.3550.0
    8.002.00113.1017.5336.0
    9.001.0059.699.2519.0

    Ring area (cm²) by hole radius (cm)

    0 100 200 300 400 0246810 Hole radius (cm) 0: Ring area (cm²) 314.16 Hole radius (cm) 1: Ring area (cm²) 311.02 Hole radius (cm) 2: Ring area (cm²) 301.59 Hole radius (cm) 3: Ring area (cm²) 285.88 Hole radius (cm) 4: Ring area (cm²) 263.89 Hole radius (cm) 5: Ring area (cm²) 235.62 Hole radius (cm) 6: Ring area (cm²) 201.06 Hole radius (cm) 7: Ring area (cm²) 160.22 Hole radius (cm) 7.07: Ring area (cm²) 157.13 Hole radius (cm) 8: Ring area (cm²) 113.10 Hole radius (cm) 9: Ring area (cm²) 59.69 59.69 Hole radius (cm) Ring area (cm²)
    Hover a point for its exact value. The table lists every value in 2 unit systems.

    Area circle with hole frequently asked questions (FAQs)

    What is the area of a ring with a 20 cm outer diameter and a 12 cm inner diameter?

    The area of a ring with a 20 cm outer diameter and a 12 cm inner diameter is 201.06 cm² (31.16 in²), from π(10² − 6²).

    What is the area of a washer?

    The area of a washer is π(R² − r²), using the outer and hole radii. A washer with a 20 mm outer diameter and a 10.5 mm hole has an area of 227.57 mm² (0.353 in²).

    How do you find the cross-section area of a pipe wall?

    You find the cross-section area of a pipe wall with A = π(R² − r²), using the outside and inside radii. A 2-inch Schedule 40 steel pipe (60.3 mm outside, 52.48 mm inside diameter) has a wall area of 692.7 mm² (1.074 in²).

    How do you find the ring area from the width and inner radius?

    You find the ring area from the width and inner radius with A = πw(2r + w). A 4 cm wide ring around a 6 cm hole radius has an area of π × 4 × 16 = 201.06 cm².

    Can the ring area be larger than the hole area?

    Yes, the ring area is larger than the hole area when the outer radius is more than √2 (1.414) times the hole radius. A 10 cm outer radius with a 6 cm hole gives a 201.06 cm² ring and a 113.10 cm² hole.

    More circle calculators